Siemens SIPART PS2 User Manual

F.6 Grounding concept 19" slide-in module
*URXQG

*URXQG
*URXQG


















*URXQG
*URXQG
*URXQG
① Link 1 / coupler (control room) via PA bus connection PAI/PAII at the
19" slide-in module
⑤ Field distributor; 48-wire, approx. 1 km
② Link 2 / coupler (control room) via PA bus connection PAI/PAII at the
19" slide-in module
⑥ Connection point
③ PA cable from QRL module to the control system, connection via
Burndy B50 connector
⑦ PA modules
④ Shield ⑧ 19" slide-in module
Ground = Ground
Figure F-5 Grounding concept, 19" slide-in module, PROFIBUS PA
Positioner with remote control electronics
F.6 Grounding concept 19" slide-in module
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC 361

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h