Siemens SIPART PS2 User Manual

Appendix
A
A.1 Certificates
The certificates can be found on the DVD supplied and on the Internet at: Certificates (http://
www.siemens.com/processinstrumentation/certificates)
A.2 Technical support
Technical Support
If this documentation does not provide complete answers to any technical questions you may
have, contact Technical Support at:
● Support request (
http://www.siemens.com/automation/support-request)
● More information about our Technical Support is available at
Technical support (http://www.siemens.com/automation/csi/service)
Internet Service & Support
In addition to our documentation, Siemens provides a comprehensive support solution at:
● Service&Support (http://www.siemens.com/automation/service&support) where you will
find support news, support documents including EDDs and software, and also support from
experts.
Additional Support
If you have additional questions about the device, please contact your local Siemens
representative.
Find your local contact partner at:
● Partner (http://www.automation.siemens.com/partner)
Documentation for various products and systems is available at:
● Instructions and manuals (http://www.siemens.com/processinstrumentation/
documentation)
See also
E-mail (mailto:support.automation@siemens.com)
SIPART PS2 product information (http://www.siemens.com/sipartps2)
Process instrumentation catalog (http://www.siemens.com/processinstrumentation/catalogs)
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC 307

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h