Siemens SIPART PS2 User Manual

11.7 Disposal
Devices described in this manual should be recycled. They may not be
disposed of in the municipal waste disposal services according to the Di‐
rective 2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally ap‐
proved disposal service for eco-friendly recycling. Observe the specific
regulations valid in your country.
Further information about devices containing batteries can be found at:
Information on battery/product return (WEEE) (https://
support.industry.siemens.com/cs/document/109479891/)
Service and maintenance
11.7 Disposal
SIPART PS2 with PROFIBUS PA
248 Operating Instructions, 05/2019, A5E00127926-AC

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h