Siemens SIPART PS2 User Manual

Description Article number For version
Small part set
With cover seal, pneumatic terminal
strips with G thread, air filter, O rings
for pneumatic connections, screws,
sound absorber, metal cable gland
A5E33519995 6DR5..0/3
With cover seal, pneumatic terminal
strips with NPT thread, air filter, O-
rings for pneumatic connections,
screws, sound absorber, metal ca‐
ble gland and metal NPT adapter
A5E33519994 6DR5..0/3
Note
See Catalog FI 01 "Field devices for process automation" for additives and possible modules.
15.3 Scope of delivery of mechanical limit switch module
If the mechanical limit switch module was ordered for later installation, then the following
components are included in the scope of delivery:
● One mechanical limit switch module with accessories
● DVD with product documentation
● One housing cover with enlarged aperture
● One insulating cover
● Two cable ties
● One set of signs; how these are to be attached depends on the version.
Spare parts/accessories/scope of delivery
15.3 Scope of delivery of mechanical limit switch module
SIPART PS2 with PROFIBUS PA
Operating Instructions, 05/2019, A5E00127926-AC 303

Siemens SIPART PS2 Specifications

General

Supply Pressure	1.4 to 7 bar (20 to 100 psi)
Enclosure Rating	IP66/NEMA 4X
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Output Pressure	0 to 100% of supply pressure
Hazardous Area Certification	ATEX, IECEx, FM, CSA
Type	Electropneumatic
Input Signal	4-20 mA
Rotation Angle	30° to 90°
Operating Temperature	-40°C to +80°C
Mounting	Linear and rotary actuators
Air Consumption	Typically less than 0.1 kg/h