Siemens SIRIUS 3RK3 - Page 315

Byte
posi‐
tion
Message Meaning Element status Cyclic data
8
1
Start condition not ful󹪝lled is set if:
• A sensor test was not executed in the case
of an active startup test function
• A discrepancy condition violation is
present
• The value "1" is not present simultaneously
at all available (parameterized) function
inputs (IN1, ...)
• A cross-circuit is present in the case of
cross-circuit monitoring
‑ ‑
8
2
... 8
7
Reserved=0
Diagnostics / service
7.6 Diagnosis using AS-Interface (CTT2 protocol)
SIRIUS 3RK3 Modular Safety System
Equipment Manual, 07/2020, NEB926253002000/RS-AC/006 315