To Next Page

To Previous Page

Troubleshooting

10.5 Force Transmit

FUE1010 IP65 NEMA 4X

Operating Instructions, 12/2014, A5E03086491-AC

169

Setting a Forced Frequency

1. To force a frequency, repeat steps 1 and 2 above, but press <Right Arrow>. The following

typical display line will appear:

Drive =0

2. Using numeric keys enter the frequency and press <ENTER>.

3. To complete the Install process after mounting the sensors press <ENTER>.

4. If the Force Transmit diagnostic procedure is not used, the normal [Install Complete]

function occurs.

Siemens SITRANS FUE1010 IP65 NEMA 4X User Manual

Questions and Answers: