Siemens SIWAREX WP231 - Decimal Place for Siebert Indicator; RS485 Character Parity; RS485 Modbus Address; RS485 Number of Data Bits

Scale parameters and functions
8.13 DR 13 RS485 parameters
SIWAREX WP231
104 Manual, 07/2014, A5E31238908A-02
8.13.4
RS485 character parity
This parameter defines the character parity for the RS485 interface.
Value
Character parity
0 Even
1 Odd
8.13.5
RS485 number of data bits
This parameter defines the number of data bits for the RS485 interface.
Value
Data bits
0 7
1 8
8.13.6
RS485 number of stop bits
This parameter defines the number of stop bits for the RS485 interface.
Value
Stop bits
0 1
1 2
8.13.7
RS485 Modbus address
This parameter defines the Modbus address (1 to 230) for communication via the RS485
interface with the Modbus protocol.
8.13.8
Decimal place for Siebert indicator
A fixed decimal place must be specified if a Siebert indicator is used. The following values
are permitted: 0 ... 4