Mounting
5.3 Mounting on the SIMATIC S7-1200
SIWAREX WP231
28 Manual, 07/2014, A5E31238908A-02
Mounting on the SIMATIC S7-1200
The electronic weighing system described here is a SIMATIC S7-1200 module and can be
directly connected to the automation system's bus system. The 70 mm wide module has very
low installation and cabling requirements.
The module is fitted on a mounting rail, and the bus connection made using the slide switch.
The load cells, power supply and serial interfaces are connected via the screw-type
connectors.
Use of the WP231 in the SIMATIC TIA Portal is described in detail in cc 11 of this manual: →
Integration in SIMATIC S7-1200 (Page 145)
To Next Page
Loading...
