SIWAREX WP231
Manual, 07/2014, A5E31238908A-02
43
Commissioning consists mainly of checking the mechanical scale structure, setting
parameters, calibration, and verification of the envisaged functionality.
The electronic weighing system described here is provided with factory-set parameters. The
parameters have been provided for a typical 100 kg scale based on three load cells.
Parameters which can be entered in % or time are preset in such a way that they provide
good results for most applications.
With these default parameters, commissioning can be carried out in 5 minutes (see chapter
Start (Page 45)).
To Next Page
Loading...
