Siemens SIWAREX WP231 - Gross Process Weight; Net Process Weight; Tare Process Weight

Scale parameters and functions
8.19 DR 30 current process values
SIWAREX WP231
Manual, 07/2014, A5E31238908A-02
115
Variable
Note
Type
Length
(bytes)
Rw
Default
Min.
Max.
Modbus
registers
Tare process
weight
(Page 116)
Tare weight (process value) FLOAT 4 r 0 - - 3012
Gross / net
weight
(Page 117)
Gross or net weight FLOAT 4 r 0 - - 3014
Gross / net
weight with
increased
resolution (x
10)
(Page 117)
Legal trade G/N weight with
10x resolution
FLOAT 4 r 0 - - 3016
Tare weight
(Page 117)
Tare FLOAT 4 r 0 - - 3018
Gross process
weight (com-
missioning
aid)
(Page 117)
Gross weight after dig. filter 2
(process value)
FLOAT 4 r 0 - - 3020
Net process
weight (com-
missioning
aid)
(Page 117)
Net weight after dig. filter 2
(process value)
FLOAT 4 r 0 - - 3022
Refresh coun-
ter for process
values
(Page 117)
Refresh counter incremented
by 1 if weight values were
changed
USHORT 2 r 0 - - 3024
Reserve 1 Reserve SHORT 2 r 0 - - 3025
Last report ID
(Page 117)
Last generated report ID ULONG 4 r 0 - - 3026
Reserve 3 Reserve FLOAT 4 r 0 - - 3028
8.19.2
Gross process weight
The current gross weight. Values are rounded as specified in data record DR 3 with the
"Decimal places for process values" (Page 71) parameter.
8.19.3
Net process weight
The current net weight. Values are rounded as specified in data record DR 3 with the
"Decimal places for process values" (Page 71) parameter.
8.19.4
Tare process weight
The current tare weight. Values are rounded as specified in data record DR 3 with the
"Decimal places for process values" (Page 71) parameter.