Siemens TC63 - AT^SCNI List Call Number Information

TC63 AT Command Set
7.26 AT^SCNI
s
TC63_ATC_V00.490 Page 175 of 501 5/24/05
Confidential / Draft - Do not copy
7.26 AT^SCNI List Call Number Information
Syntax
Command Description
TA returns a list of current calls of ME.
Parameter Description
call identification number as described in GSM 02.30[19] subclause 4.5.5.1; this number can be used in
AT+CHLD command operations
1...7
Call status of respective call number (first parameter)
0 call hold
1 call in progress
2 waiting call
string type phone number in format specified by <type>
type of address octet in integer format; 145 when dialling string includes international access code character "+",
otherwise 129
Note
• See also GSM 07.07: AT+CLCC
Test Command
AT^SCNI=?
Response(s)
OK
Exec Command
AT^SCNI
Response(s)
^SCNI: <id>
1
[,<cs>[,<number>,<type>]]
^SCNI: <id>
2
[,<cs>[,<number>,<type>]]
[...]
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
SIEMENS % % % % % % % ! ! !
<id>
(num)
<cs>
(num)
<number>
(str)
<type>
(num)