Siemens TC63 - Table 1.5: Examples for Character Definitions Depending on Alphabet

TC63 AT Command Set
1.5 Supported character sets
s
TC63_ATC_V00.490 Page 21 of 501 5/24/05
Confidential / Draft - Do not copy
Table 1.5: Examples for character definitions depending on alphabet
CAUTION: Often, the editors of terminal programs do not recognize escape sequences. In this case, an escape
sequence will be handled as normal characters. The most common workaround to this problem is to write a script
which includes a decimal code instead of an escape sequence. This way you can write, for example, short mes-
sages which may contain differently coded characters.
GSM 03.38
character
GSM character
hex. value
Corresponding
ASCII character
ASCII
Esc sequence
Hex Esc
sequence
Ö 5C \ \5C 5C 35 43
" 22 " \22 5C 32 32
ò 08 BSP \08 5C 30 38
@ 00 NULL \00 5C 30 30