Siemens TC63 - 11.15 AT^SGAUTH Set type of authentication for PPP connection

TC63 AT Command Set
11.15 AT^SGAUTH
s
TC63_ATC_V00.490 Page 301 of 501 5/24/05
Confidential / Draft - Do not copy
11.15 AT^SGAUTH Set type of authentication for PPP connection
Syntax
Parameter Description
Indicates types of supported authentication.
0none
1 PAP
2 CHAP
3
(&F)(P)
PAP and CHAP
Test Command
AT^SGAUTH=?
Response(s)
^SGAUTH: (list of supported <auth>s)
OK
ERROR
+CME ERROR
Read Command
AT^SGAUTH?
Response(s)
^SGAUTH: <auth>
OK
ERROR
+CME ERROR
Write Command
AT^SGAUTH=<auth>
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
SIEMENS ! % % % % % % ! % !
<auth>
(num)