Siemens TC63 - AT+CPOL Preferred Operator List

TC63 AT Command Set
8.14 AT+CPOL
s
TC63_ATC_V00.490 Page 204 of 501 5/24/05
Confidential / Draft - Do not copy
8.14 AT+CPOL Preferred Operator List
The AT+CPOL read command returns the list of the preferred operators. The AT+CPOL write command allows to
edit the list of the preferred operators. If <index> is given but <operator> is left out, the entry is deleted. An
operator can be only once in the list.
Syntax
Parameter Description
The order number of the operator in the SIM preferred operator list.
2 Numeric format
Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code
plus a 2- or 3-digit network code).
Test Command
AT+CPOL=?
Response(s)
+CPOL:(list of supported <index>s), (list of supported <format>s)
OK
ERROR
+CME ERROR
Read Command
AT+CPOL?
Response(s)
+CPOL: <index>, <format>, <operator>
+CPOL: ...
OK
ERROR
+CME ERROR
Write Command
AT+CPOL=<index>[, <format>, <operator>]
Response(s)
OK
ERROR
+CME ERROR:
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
GSM 07.07 % % % % % % % ! % !
<index>
(num)
<format>
(num)
<operator>
(str)