Siemens TC63 - Example: Configuring and Using FTP Download; Example: Configuring and Using FTP Upload

TC63 AT Command Set
10.2 AT^SISS
s
TC63_ATC_V00.490 Page 251 of 501 5/24/05
Confidential / Draft - Do not copy
10.2.3 Example: Configuring and Using FTP Download
First set up a connection profile as explained in Section 10.1.1 or Section 10.1.2. Enter at least all parameters
which are mandatory for the connection profile.
Configure the service profile 1 for FTP:
Make an FTP connection:
10.2.4 Example: Configuring and Using FTP Upload
First set up a connection profile as explained in Section 10.1.1 or Section 10.1.2. Enter at least all parameters
which are mandatory for the connection profile.
Configure the service profile 1 for FTP:
Make an FTP connection:
OK
at^siss=1,address,"socktcp://
10.10.0.187:65534"
The service profile of the client contains the IP
address and the TCP port of the remote host.
OK
at^siss=1,srvType,ftp Select service type FTP.
OK
at^siss=1,conId,0 Select connection profile 0.
OK
at^siss=1,address,"ftp://
192.168.1.2;type=d"
Specify FTP address with user and password anon-
ymous.
OK
at^siso=1 Open the service.
OK Bearer is established, service is getting started.
^SISR: 1, 1 Data are available.
at^sisr=1,1500 Request to read 1500 bytes.
^SISR: 1, 50 50 bytes are now available.
hardware
inttest
software
support
systemtest
OK
^SISR: 1, 2 Data transfer finished. No more data available. The
connection to the FTP server is closed.
at^sisc=1 Close the service.
OK
at^siss=1,srvType,ftp Select service type FTP.
OK
at^siss=1,conId,0 Select connection profile 0.
OK
at^siss=1,address,"ftpput://
myname:mypasswd@192.168.1.2/upload/exam-
ple.txt"
Specify FTP address with individual user name and
password. The file "example.txt" shall be created on
the FTP server.
OK
at^siso=1 Open the service.
OK Bearer is established, service is getting started.