Siemens TC63 - 13.12 AT+CPMS Preferred SMS message storage

TC63 AT Command Set
13.12 AT+CPMS
s
TC63_ATC_V00.490 Page 340 of 501 5/24/05
Confidential / Draft - Do not copy
13.12 AT+CPMS Preferred SMS message storage
Syntax
Command Description
The write command selects memory storages <mem1>,<mem2>, <mem3> to be used for reading, writing, etc.
Parameter Description
Number of messages currently in <mem1>
Number of messages currently in <mem2>
Number of messages currently in <mem3>
Number of messages storable in <mem1>
Number of messages storable in <mem2>
Test Command
AT+CPMS=?
Response(s)
+CPMS: (list of supported <mem1>s), (list of supported <mem2>s), (list of supported <mem3>s)
OK
Read Command
AT+CPMS?
Response(s)
+CPMS: <mem1>, <used1>, <total1>, <mem2>, <used2>, <total2>, <mem3>, <used3>, <total3>
OK
ERROR
+CMS ERROR
Write Command
AT+CPMS=<mem1>[, <mem2>[, <mem3>]]
Response(s)
+CPMS: <used1>, <total1>, <used2>, <total2>, <used3>, <total3>
OK
ERROR
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
GSM 07.05 % % % % % % % ! % !
<used1>
(num)
<used2>
(num)
<used3>
(num)
<total1>
(num)
<total2>
(num)