Siemens TC63 - Table 21.8: Settings Stored to User Profile on ASC1; MUX Channels 2 and 3

TC63 AT Command Set
21.5 AT Command Settings storable with AT&W
s
TC63_ATC_V00.490 Page 481 of 501 5/24/05
Confidential / Draft - Do not copy
Table 21.8: Settings Stored to User Profile on ASC1 / MUX Channels 2 and 3
AT+CLIP <n>
GPRS Commands
ATS0 <n>
FAX Commands
AT+FCLASS <n>
Short Message Service (SMS) Commands
AT+CMGF <mode>
AT+CNMI <mode>, <mt>, <bm>, <ds>
AT+CSCB <mode>
AT+CSDH <show>
AT+CSMS <service>
AT^SMGO <n>
SIM related Commands
AT^SCKS <mode>
AT^SSET <n>
Miscellaneous Commands
ATS3 <n>
ATS4 <n>
ATS5 <n>
AT Command Stored Parameters
Configuration Commands
ATQ <n>
ATV <value>
ATX <value>
AT+CMEE <errMode>
Serial Interface Control Commands
AT\Q <n>
AT&C <value>
AT&D <value>
AT&S <value>
ATE <value>
AT+ICF <format>, <parity>
AT+IFC <TEflowcontrol>, <TAflowcontrol>
AT Command Stored Parameters