Siemens TC63 - Example: Default Values of a CSD Connection Profile; Example: GPRS Connection Profile

TC63 AT Command Set
10.1 AT^SICS
s
TC63_ATC_V00.490 Page 240 of 501 5/24/05
Confidential / Draft - Do not copy
Supported authentication mode values in <conParmValue> for <conParmTag> value "authMode". Changing
the <conParmValue-authMode> will restore the password to its default ("").
“none“
[“PAP“]
“CHAP“
“MsChapV1“
10.1.1 Example: Default values of a CSD connection profile
As stated earlier, the "conType" selected with AT^SICS determines all other matching profile parameters related
to this "conType". Once "conType" is set in a new profile, the default values of all other related parameters are
assumed. To view the default settings you can use the read command AT^SICS?.
10.1.2 Example: GPRS connection profile
<conParmValue-authMode>
(str)
at^sics=1,conType,CSD Select connection type CSD, identified by <con-
ProfileId>1
OK
at^sics? Query current profiles.
^SICS: 0, "conType", "" Profile with <conProfileId> 0 is still empty.
^SICS: 1, "conType", "CSD" The new CSD profile just created is indicated with all
related parameters set to their default.
^SICS: 1, "alphabet", "0" Character set determined with AT+CSCS applies
when string parameters are input with AT^SICS.
^SICS: 1, "user", "" No user name set.
^SICS: 1, "passwd", "" No password set.
^SICS: 1, "authMode", "PAP" Authentication protocol PAP is assumed as default.
^SICS: 1, "inactTO", "0" No inactivity timeout set.
^SICS: 1, "calledNum", "" No destination set.
^SICS: 1, "dataRate", "1" Data rate set to 9.6 kbaud.
^SICS: 1, "dataType", "1" Remote device is analog, e.g. an analog modem.
^SICS: 2, "conType", "" Profile with <conProfileId> 2 is still empty.
^SICS: 3, "conType", "" Profile with <conProfileId> 3 is still empty.
^SICS: 4, "conType", "" Profile with <conProfileId> 4 is still empty.
^SICS: 5, "conType", "" Profile with <conProfileId> 5 is still empty.
OK
at^sics=0,conType,GPRS0 Select connection type GPRS0.
OK
AT^SICS=0,inactTO,"0" Inactivitiy timeout = 0 (default).
OK
AT^SICS=0,dns1,"193.254.160.1" IP address of Primary DNS server.
OK
AT^SICS=0,authMode,"PAP" Authentication protocol PAP (default).
OK
AT^SICS=0,passwd,t-d1 Password for GPRS services provided by the Ger-
man operator T-D1.
OK