Siemens TC63 - AT+VTD Tone Duration

TC63 AT Command Set
18.6 AT+VTD
s
TC63_ATC_V00.490 Page 415 of 501 5/24/05
Confidential / Draft - Do not copy
18.6 AT+VTD Tone duration
This command refers to an integer <duration> that defines the length of tones transmitted with the AT+VTS
command.
Syntax
Parameter Description
Duration of the tone in 1/10 second
1
(&F)
...255
Test Command
AT+VTD=?
Response(s)
+VTD: (list of supported<duration>s)
OK
Read Command
AT+VTD?
Response(s)
<duration>
OK
Write Command
AT+VTD=<duration>
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
GSM 07.07 ! % % % % % % ! ! !
<duration>
(num)