TC63 AT Command Set
13.21 AT^SCMW
s
TC63_ATC_V00.490 Page 354 of 501 5/24/05
Confidential / Draft - Do not copy
13.21 AT^SCMW Write concatenated SMS messages to memory
Writing a concatenated message to the memory is similar to writing a "normal" message, except that each seg-
ment of the concatenated message must be identified by the additional parameters <seq>, <ieia> and <ref>.
To store all segments of the message one by one, the AT^SCMW write command must be executed for each seg-
ment.
Syntax
Command Description
The write commands transmits one segment of a concatenated SMS (either SMS-DELIVER or SMS-SUBMIT)
from TE to memory storage <mem2>. Memory location <index> of the stored message is returned. Message
status will be set to 'stored unsent' unless otherwise given in parameter <stat>.
Notes
• Command is only available if AT+CMGF=1.
• To send or delete a concatenated short message please use the known SMS commands, see AT+CMSS for
sending and AT+CMGD for deleting.
• See notes provided for AT+CMGW.
Test Command
AT^SCMW=?
Response(s)
OK
Write Command
If text mode (see AT+CMGF=1)
AT^SCMW=<oa>/<da>, [<tooa>/<toda>][, <stat>], <seq>, <max>, <ieia>, <ref>
<CR> Text can be
entered.
<CTRL-Z>/<ESC>
Response(s)
^SCMW: <index>
OK
If writing fails
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
SIEMENS % % % % % % % ! % !
To Next Page
Loading...
