Siemens TC63 - AT\V Set CONNECT Result Code Format

TC63 AT Command Set
2.7 AT\V
s
TC63_ATC_V00.490 Page 38 of 501 5/24/05
Confidential / Draft - Do not copy
2.7 AT\V Set CONNECT result code format
Syntax
Parameter Description
[0] CONNECT <text> result code returned without RLP trailer
1
(&F)
CONNECT <text> result code returned with RLP trailer
Notes
• For circuit switched data calls only.
• Output only if ATX parameter is set with value > 0.
Exec Command
AT\V[<value>]
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
V.250 ! % ! % % ! ! ! % !
<value>
(num)(&W)(&V)