Siemens TC63 - Table 21.3: Star-Hash Command Response Parameters; Table 21.4: Star-Hash Commands for Supplementary Services

TC63 AT Command Set
21.2 Star-Hash (*#) Network Commands
s
TC63_ATC_V00.490 Page 465 of 501 5/24/05
Confidential / Draft - Do not copy
Table 21.3: Star-Hash Command Response Parameters
For exact specification of format and parameters for Star-Hash commands refer to GSM 02.04, Table 3.2 [17]
and GSM 02.30, Annex C [18].
Table 21.4: Star-Hash Commands for Supplementary Services
PW Password --
C Character of TE character set (e.g. asterics, hash
or digit in case of USSD, or digits in case of held
calls or multiparty calls)
--
Parameter Meaning
<m> Mode: 0 = not active, 1 = active
<n> Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
<status> Status: 0 = not active, 1 = active
<class> Represents BS = basic service, refer to AT+CCFC, AT+CLCK
<fac> Facility lock, refer to AT+CLCK
<reason> Call forwarding reason
Star-Hash Code Abbreviations in Table 21.1 Functionality
* act Activate (except for CLIR, see list above)
** reg Register and activate
*# int Check status (interrogate)
# deact Deactivate (except for CLIR, see list above)
## eras Unregister and deactivate
Abbreviation Meaning Value