Siemens TC63 - AT^SSMSS Set Short Message Storage Sequence

TC63 AT Command Set
13.28 AT^SSMSS
s
TC63_ATC_V00.490 Page 362 of 501 5/24/05
Confidential / Draft - Do not copy
13.28 AT^SSMSS Set Short Message Storage Sequence
Syntax
Command Description
The short message storage ''MT'' (see AT+CPMS) is a logical storage. It consists of two physical storages ''ME''
and ''SM''. This command allows to select the sequence of addressing this storage.
Parameter Description
MT sequence
0
(&F)
''MT'' storage is ''ME'' then ''SM
1 ''MT'' storage is ''SM'' then ''ME''
Note
• Access to the SIM storage is faster. For compatibility with previous software re-leases, the ''MT'' sequence
<seq>=0 is the factory default.
Test Command
AT^SSMSS=?
Response(s)
^SSMSS: (list of supported) <seq>s
Read Command
AT^SSMSS?
Response(s)
^SSMSS: <seq>
OK
Write Command
AT^SSMSS=<seq>
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
SIEMENS ! % % % % % % ! % !
<seq>
(num)