TC63 AT Command Set
12.7 AT+FTM
s
TC63_ATC_V00.490 Page 317 of 501 5/24/05
Confidential / Draft - Do not copy
12.7 AT+FTM Transmit Data
The AT+FTM command causes the TA to transmit data using the modulation mode defined in Section 12.1, FAX
parameters. An ERROR response code results if this command is issued while the modem is on-hook.
Syntax
Notes
• Used for Fax Class 1 only
• <mod>= 3 is not possible
Test Command
AT+FTM=?
Response(s)
(list of <mod>s)
OK
Write Command
AT+FTM=<mod>
Response(s)
CONNECT
If error is related to ME functionality
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
TIA/EIA-578 ! % ! % % ! ! ! ! !
To Next Page
Loading...
