Siemens TC63 - 21.4 Availability of AT Commands Depending on Operating Mode of ME

TC63 AT Command Set
21.4 Availability of AT Commands Depending on Operating Mode of ME
s
TC63_ATC_V00.490 Page 473 of 501 5/24/05
Confidential / Draft - Do not copy
21.4 Availability of AT Commands Depending on Operating Mode of ME
! ... Command not supported
% ... Command supported
§ ... Use in Airplane mode depends on command type (test, read, execute, write).
See description of AT command for details.
Table 21.6: Availability of AT Commands Depending on Operating Mode of ME
AT Command Normal Mode
4
Charge
Configuration Commands
AT&F % % !
AT&V % % !
AT&W % % !
ATQ % % !
ATV % % !
ATX % % !
AT\V % % !
ATZ % % !
AT+CFUN % % !
AT^SMSO % % !
AT+GCAP % % !
AT+CMEE % % !
AT+CSCS % % !
AT^SCFG % § §
AT^SM20 % ! !
Status Control Commands
AT+CMER % % !
AT+CIND % % !
AT^SIND % % !
AT+CEER % % !
ATS18 % % !
AT+CPAS % % !
AT+WS46 % % !
Serial Interface Control Commands
AT\Q % % !
AT&C % % !
AT&D % % !
AT&S % % !
ATE % % !
AT+ICF % % !
AT+IFC % % !