Siemens TC63 - AT+CSCB Select Cell Broadcast Message Indication

TC63 AT Command Set
13.14 AT+CSCB
s
TC63_ATC_V00.490 Page 343 of 501 5/24/05
Confidential / Draft - Do not copy
13.14 AT+CSCB Select Cell Broadcast Message Indication
Syntax
Command Description
Test command returns supported modes as a compound value.
Write command selects which types of CBMs are to be received by the ME.
Parameter Description
Message mode
[0] Accept messages that are defined in <mids> and <dcss>
1 Forbid messages that are defined in <mids> and <dcss>
Cell Broadcast Message ID specification
•For <mode>=0: Six different possible combinations of CBM IDs (e.g. "0,1,5,320-478,922,2000-3000"), default
is empty string.
In certain configurations, e.g. if using SIMs that contain data in Elementary File EF-CBMID (Cell Broadcast
Message Identifier for Data download) less than six combinations may be available.
To access a SIM's Elementary File data refer to command AT+CRSM.
•For <mode>=1: One CBM ID or range of IDs (e.g. "320-478"), default is empty string.
CBM data coding scheme specification
All different possible combinations of CBM data coding schemes (e.g. "0-3,5"). Using default empty string leads
to get all CBMs independent of their dcss.
A given <dcss> replaces any former value and is used for consecutive requests.
Test Command
AT+CSCB=?
Response(s)
+CSCB: (list of supported <mode>s)
OK
Read Command
AT+CSCB?
Response(s)
+CSCB: <mode>, <mids>, <dcss>
OK
Write Command
AT+CSCB=[<mode>[, <mids>[, <dcss>]]]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
GSM 07.05 % % % % % % % ! % !
<mode>
(num)(&W)
<mids>
(str)
<dcss>
(str)