TC63 AT Command Set
9.11 AT+COLP
s
TC63_ATC_V00.490 Page 227 of 501 5/24/05
Confidential / Draft - Do not copy
9.11 AT+COLP Connected Line Identification Presentation
This command refers to the GSM supplementary service COLP (Connected Line Identification Presentation) that
enables a calling subscriber to get the connected line identity (COL) of the called party after setting up a mobile
originated call. The command enables or disables the presentation of the COL at the TE. It has no effect on the
execution of the supplementary service COLR in the network.
Syntax
Unsolicited Result Code
Call response format:
+COLP: <number>, <type>
Parameter Description
0 Disable - suppress unsolicited result codes
1 Enable - display unsolicited result codes
0 COLP not provisioned (no presentation)
1 COLP provisioned
2 Unknown
String type phone number of connected address in format specified by <type>
Test Command
AT+COLP=?
Response(s)
+COLP:(list of supported <n>s)
OK
Read Command
AT+COLP?
Response(s)
+COLP: <n>, <m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+COLP=[<n>]
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
GSM 07.07 % % % % % % % ! ! !
<n>
(num)
<m>
(num)
<number>
(str)
To Next Page
Loading...
