Siemens TC63 - ATS4 Set Response Formatting Character

TC63 AT Command Set
20.3 ATS4
s
TC63_ATC_V00.490 Page 459 of 501 5/24/05
Confidential / Draft - Do not copy
20.3 ATS4 Set response formatting character
The ATS4 command determines the character generated by the TA for result code and information text.
Syntax
Parameter Description
response formatting character
000...10
(&F)
...127
Note
• Whenever you change the setting take into account that the new value has no effect on the URC "^SHUT-
DOWN".
Read Command
ATS4?
Response(s)
<n>
OK
Write Command
ATS4=<n>
Response(s)
OK
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
V.250 ! % % % % % % ! % !
<n>
(num)(&W)(&V)