Siemens TC63 - AT+CPAS Mobile Equipment Activity Status

TC63 AT Command Set
3.6 AT+CPAS
s
TC63_ATC_V00.490 Page 87 of 501 5/24/05
Confidential / Draft - Do not copy
3.6 AT+CPAS Mobile equipment activity status
The AT+CPAS execute command indicates the activity status of the ME.
Syntax
Parameter Description
0 Ready
3 Incoming call (ringing)
4 Call in progress or call hold
Test Command
AT+CPAS=?
Response(s)
+CPAS: (list of supported<pas>s)
OK
Exec Command
AT+CPAS
Response(s)
+CPAS: <pas>
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last
GSM 07.07 ! % % % % % % ! % !
<pas>
(num)