TC63 AT Command Set
9.7 AT+CCWA
s
TC63_ATC_V00.490 Page 221 of 501 5/24/05
Confidential / Draft - Do not copy
Examples
EXAMPLE 1
Parameter <n>
EXAMPLE 2
Parameter <mode>
EXAMPLE 3
Parameter <class>
at+ccwa=1
To enable the presentation of the URC
OK
at+ccwa=,1
To activate the supplementary service in the network for voice, data,
and fax calls (default classes).
Note that parameter <n> is left out. In this case, the current value of <n>
will be retained.
OK
at+ccwa=,2
To query the network status of call waiting for default classes
at+ccwa=1,1
Call Waiting is activated during voice calls.
at+ccwa=1,2
Call Waiting is activated during data calls.
at+ccwa=1,4
Call Waiting is activated during fax calls.
OK
AT+CCWA=,0,1
To deactivate call waiting for voice calls.
OK
To Next Page
Loading...
