TC63 AT Command Set
10.6 AT^SISW
s
TC63_ATC_V00.490 Page 264 of 501 5/24/05
Confidential / Draft - Do not copy
Indicates whether or not data are available for transfer with AT^SISW.
0 No data available for writing with AT^SISW.
1 New data can be written via AT^SISW.
2 In the case of Socket, FTP download, HTTP: Data transfer has been finished
and Internet service can be closed via AT^SISC.
In the case of FTP upload and SMTP: To indicate successful transmission, the
URC "^SISW: x,2" is sent after the service was gracefully closed. If the FTP
upload or SMTP service is closed immediately the URC will not be sent.
<urcCauseId>
(num)
To Next Page
Loading...
