Siemens TC63 - Page 284

TC63 AT Command Set
11.8 AT+CGEQREQ
s
TC63_ATC_V00.490 Page 284 of 501 5/24/05
Confidential / Draft - Do not copy
0 conversational
1 streaming
2 interactive
3 background
[4] subscribed value
This parameter indicates the maximum number of kbits/s delivered to UMTS (up-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...128 (value needs to be divisible by 8 without remainder)
256
512
This parameter indicates the maximum number of kbits/s delivered by UMTS (down-link traffic) at a SAP. As an
example a bitrate of 32kbit/s would be specified as 32 (e.g. AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...256 (value needs to be divisible by 8 without remainder)
512
This parameter indicates the guaranteed number of kbits/s delivered to UMTS (up-link traffic) at a SAP (provided
that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...128 (value needs to be divisible by 8 without remainder)
This parameter indicates the guaranteed number of kbits/s delivered by UMTS (down-link traffic) at a SAP (pro-
vided that there is data to deliver). As an example a bitrate of 32kbit/s would be specified as 32 (e.g.
AT+CGEQREQ=...,32,...).
[0] subscribed value
1...63
64...256 (value needs to be divisible by 8 without remainder)
This parameter indicates whether the UMTS bearer shall provide in-sequence SDU delivery or not.
0no
1yes
[2] subscribed value
<Traffic class>
(num)
<Maximum bitrate UL>
(num)
<Maximum bitrate DL>
(num)
<Guaranteed bitrate UL>
(num)
<Guaranteed bitrate DL>
(num)
<Delivery order>
(num)