EasyManua.ls Logo

Siemens TC63 - Page 297

Siemens TC63
501 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TC63 AT Command Set
11.12 AT+CGREG
s
TC63_ATC_V00.490 Page 297 of 501 5/24/05
Confidential / Draft - Do not copy
0 Not registered, ME is not currently searching an operator to register to. The ME
is in GMM state GMM-NULL or GMM-DEREGISTERED-INITIATED.
The GPRS service is disabled, the ME is allowed to attach to GPRS if
requested by the user.
1 Registered, home network. The ME is in GMM state GMM-REGISTERED or
GMM-ROUTING-AREA-UPDATING-INITIATED INITIATED on the home
PLMN
2 Not registered, but ME is currently trying to attach or searching an operator to
register to. The ME is in GMM state GMM-DEREGISTERED or GMM-REGIS-
TERED-INITIATED. The GPRS service is enabled, but an allowable PLMN is
currently not available. The ME will start a GPRS attach as soon as an allow-
able PLMN is available.
3 Registration denied. The ME is in GMM state GMM-NULL. The GPRS service
is disabled, the ME is not allowed to attach to GPRS if requested by the user.
4 Unknown
5 Registered, roaming. The ME is in GMM state GMM-REGISTERED or GMM-
ROUTING-AREA-UPDATING-INITIATED on a visited PLMN.
Two byte location area code in hexadecimal format.
Two byte cell ID in hexadecimal format.
Note
When the module is GPRS attached and a PLMN reselection occurs to a non-GPRS network or to a network
where the SIM is not subscribed to for using GPRS, the resulting GMM (GPRS mobility management) state
according to GSM 24.008 is REGISTERED/NO CELL, meaning that the read command will still show
<stat>=1 or <stat>=5.
<stat>
(num)
<lac>
(str)
<ci>
(str)

Table of Contents

Related product manuals