TC63 AT Command Set
13.1 SMS parameters
s
TC63_ATC_V00.490 Page 322 of 501 5/24/05
Confidential / Draft - Do not copy
Reference number to identify all segments of the concatenated SMS (i.e. the number needs to be the same for
each segment). If <ieia>=8 then max=255, otherwise 65535.
0...255
0...65535
Service Center Address
GSM 04.11 RP SC address Address-Value field in string format; BCD numbers (or GSM default alphabet char-
acters) are converted to characters of the currently selected TE character set (refer to command AT+CSCS); type
of address given by <tosca>
Service Centre Time Stamp
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer <dt>)
Sequence number of the concatenated SMS beginning with 1. The number must be incremented by one for
each segment of the concatenated short message.
<seq>=0 means: ignore the value. This will result in a non-concatenated SMS.
0...255
Serial Number
GSM 03.41 CBM Serial Number in integer format
Status
GSM 03.40 TP-Status in integer format
0...255
Message status
3GPP 27.005 Interface of SMS and CB. Indicates the status of message in memory.
<ref>
(num)
<sca>
(num)(+CSCS)
<scts>
(num)
<seq>
(num)
<sn>
(num)
<st>
(num)
<stat>
(str)
Description text mode (<mode>=1) PDU mode (<mode>=0) Default
Received unread mes-
sages
"REC UNREAD" 0 for SMS reading com-
mands
Received read messages "REC READ" 1
Stored unsent messages "STO UNSENT" 2 for SMS writing com-
mands
Stored sent messages "STO SENT" 3
All messages "ALL" 4
To Next Page
Loading...
