TC63 AT Command Set
13.24 AT^SMGO
s
TC63_ATC_V00.490 Page 358 of 501 5/24/05
Confidential / Draft - Do not copy
1 SMS buffer full (The buffer for received short messages is <mem3>. See
AT+CPMS.)
2 Buffer full and new message waiting in SC for delivery to phone
Notes
• Incoming short messages with message class 1 (ME specific short messages) or class 2 (SM specific short
messages), see <dcs> in GSM 03.38, will be stored either in ''ME'' or in ''SM'' storage. Therefore the "^SMGO:
2" indication could occur, without issuing the indication "^SMGO: 1" before. The indication "^SMGO: 1" means
that both buffers (''ME'' and ''SM'') are full.
• For more information regarding SIM and ME specific message classes refer to <dcs> and the following spec-
ifications: GSM 03.38 and 3GPP TS 23.038 .
To Next Page
Loading...
