Siemens TC63 - Page 43

TC63 AT Command Set
2.9 AT+CFUN
s
TC63_ATC_V00.490 Page 43 of 501 5/24/05
Confidential / Draft - Do not copy
Any AT command (incl. outgoing
SMS, voice or data call)
Not possible (UART disabled) Temporary
Incoming SMS (AT+CNMI is set to
0,0 (this is the default setting)
No effect No effect
Incoming SMS (AT+CNMI is set to
1,1)
Quit Temporary
GPRS data transfer Not possible (UART disabled) Temporary
RTC alarm line Quit Temporary
AT+CFUN=1 Not possible (UART disabled) Quit
Event Selected mode:
<fun>=0
Selected mode:
<fun>=7 or 9