Siemens TC63 - Page 484

TC63 AT Command Set
21.6 Factory Default Settings Restorable with AT&F
s
TC63_ATC_V00.490 Page 484 of 501 5/24/05
Confidential / Draft - Do not copy
AT^SALS <view>=0, <line>=1
Supplementary Service Commands
AT^SACM <n>=0
AT+CLIP <n>=0
AT+CSSN <n>=0, <m>=0
AT+CUSD <n>=0
GPRS Commands
AT+CGAUTO <n>=3
AT+CGSMS <service>=3
AT^SGAUTH <auth>=3
ATS0 <n>=000
FAX Commands
AT+FCLASS <n>=0
Short Message Service (SMS) Commands
AT+CMGF <mode>=0
AT+CNMI <mode>=0, <mt>=0, <bm>=0, <ds>=0, <bfr>=1
AT+CSDH <show>=0
AT+CSMP <fo>=17, <vp>=167, <dcs>=0, <pid>=0
AT+CSMS <service>=0
AT^SMGO <n>=0
AT^SSCONF <ra>=0
AT^SSDA <da>=0
AT^SSMSS <seq>=0
SIM related Commands
AT^SCKS <mode>=0
AT^SSET <n>=0
Phonebook Commands
AT+CPBS <storage>="SM"
AT^SPBS <internal-counter>=0
Audio Commands
AT+VTD <duration>=1
Hardware related Commands
AT^SCTM <n>=0
AT^SSPI <connectionState>=0, <delayOne>=0, <delayTwo>=0
AT Command Factory Defaults