EasyManua.ls Logo

Siemens TC63 - Page 63

Siemens TC63
501 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TC63 AT Command Set
2.14 AT^SCFG
s
TC63_ATC_V00.490 Page 63 of 501 5/24/05
Confidential / Draft - Do not copy
If a DTR activation has occured the ME issues the URC "^SCFG: " followed by the response of the executed
command; the message reference in this case:
EXAMPLE 2
Configure TC63 to perform a reset every 10 hours. The execution of the reset command shall be deferred
until after any calls have ended.
For details regarding software controlled power down refer to AT+CFUN and AT^SMSO.
After ten hours:
EXAMPLE 3
Switch off the ME after three minutes without restarting it.
For details regarding software controlled power down refer to AT+CFUN and AT^SMSO.
After three minutes:
EXAMPLE 4
Deactivate a timer-driven Autoexec function configured at <AutoExecIndex> 2 (such as the periodic auto-
matic reset or the automatic switch-off functions configured in the preceding examples):
EXAMPLE 5
Usage of "URC/Ringline" and "URC/Datamode/Ringline":
+CMGW: 1
Confirms that message is stored to first location.
OK
AT^SCFG="AutoExec",1,0,0,0,"AT+CMSS=1"
Enable execution on next DTR activation.
^SCFG: "AutoExec","1","0","0","0","at+cmss=1"
^SCFG: "AutoExec","0","1","0","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","1","0","","000:00:00","000:00:00"
^SCFG: "AutoExec","0","1","2","0","","000:00:00","000:00:00"
OK
^SCFG:"AutoExec",0,0,1,0,"AT+CMSS=1"
OK
Confirms that AT+CMSS=1 has been issued.
+CMSS: 16
AT^SCFG="AutoExec",1,1,2,5,"AT+CFUN=0,1","010:00:00"
...
OK
^SCFG:"AutoExec",1,1,2,5,"AT+CFUN=0,1"
OK
Confirms that AT+CFUN=0,1 has been issued.
SYSSTART
TC63 has restarted. Remember that the
"^SYSSTART" URC will not appear if autobauding is
enabled.
AT^SCFG="AutoExec",1,1,2,0,"AT^SMSO","000:03:00"
...
OK
^SCFG:"AutoExec",0,1,2,0,"AT^SMSO"
^SMSO: MS OFF
^SHUTDOWN
Indicates that AT^SMSO was successfully executed.
The ME enters the POWER DOWN mode.
AT^SCFG="AutoExec",0,1,2
...
OK
AT+CSCS="GSM"
Switch to GSM character set.
OK
AT^SCFG?
Query all parameters.
...
^SCFG:"URC/Datamode/Ringline","off"
While the TA-TE link is reserved URCs will be indi-
cated by BREAK.

Table of Contents

Related product manuals