EasyManuals Logo

Simplex 4100 Installation Manual

Simplex 4100
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
SIMPLEX 4100 EWIS Page iii
INSTALLATION MANUAL
Document No.: 4100-M011 March 1998 Issue 1.0
AMENDMENTS TO 4100 INSTALLATION MANUAL
ISSUE
SECTION/PAGES
AMENDED
DATE
AMENDED COMMENTS ECN No.
1.0
New Manual March 1998
Original - File:
ewisins
RELATED DOCUMENTATION
This manual is part of a three volume set relating to the 4100 EWIS Option. The
following lists the documentation relating to the 4100 EWIS Option.
Volume 1 4100 EWIS - Operator Manual.
This manual describes the operating procedures for a typical 4100
EWIS Option. 4100 EWIS Operator Manual
Part No/Document No: 4100-M010
Volume 2 4100 EWIS - Installation Manual.
This manual describes the procedures for installing and commissioning
typical 4100 EWIS Option. 4100 EWIS Installation Manual
Part No/Document No: 4100-M011
Volume 3 4100 EWIS - Technical Manual.
This manual contains technical descriptions of the various components
of typical 4100 EWIS Panel. 4100 EWIS Technical Manual
Part No/Document No: 4100-M012
STANDARDS ASSOCIATION OF AUSTRALIA
This manual makes reference to the following Australian Standards:
AS2220 Emergency warning and intercommunications systems in buildings.
Part 1 and 2 (1989)
AS1670 Automatic Fire Detection and Alarm Systems -
System Design, Installation and Commissioning
TABLE OF CONTENTS
AMENDMENTS TO 4100 INSTALLATION MANUAL ...........................................................III
RELATED DOCUMENTATION...................................................................................................... III

Table of Contents

Other manuals for Simplex 4100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simplex 4100 and is the answer not in the manual?

Simplex 4100 Specifications

General IconGeneral
TypeFire Alarm Control Panel
ManufacturerSimplex
Model4100
Network CapabilityYes
AddressableYes
Power Supply120/240 VAC, 50/60 Hz
DisplayLCD
Annunciator SupportYes
Battery BackupYes
Releasing CapabilityYes
Max DevicesDepends on configuration
Max Notification Appliance Circuits (NAC)Varies with configuration
Max Releasing CircuitsVaries with configuration
Max Remote AnnunciatorsVaries with configuration
Communication PortsMultiple
Operating Temperature32°F to 120°F (0°C to 49°C)
Humidity RangeUp to 93% RH, non-condensing
NAC Outputs4 (expandable)
NetworkingYes

Related product manuals