EasyManuals Logo

Simplex 4100 Installation Manual

Simplex 4100
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
SIMPLEX 4100 EWIS Page 29
INSTALLATION MANUAL
Document No.: 4100-M011 March 1998 Issue 1.0
Figure 12.
Wiring to the speaker lines is supervised via a 10k end of line resistor placed across
the last speaker in each zone.
The capacitor fly lead is connected to the transformer primary winding. Select either
0.5 W, 1 W, 2 W, or 5 W terminal for the required power output for the speaker.

Table of Contents

Other manuals for Simplex 4100

Preview: Operating Instructions
Operating Instructions97 pages
Preview: Operation
Operation40 pages
Preview: Operator's Manual
Operator's Manual100 pages
Preview: Service Instructions
Service Instructions98 pages

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simplex 4100 and is the answer not in the manual?

Simplex 4100 Specifications

General IconGeneral
TypeFire Alarm Control Panel
ManufacturerSimplex
Model4100
Network CapabilityYes
AddressableYes
Power Supply120/240 VAC, 50/60 Hz
DisplayLCD
Annunciator SupportYes
Battery BackupYes
Releasing CapabilityYes
Max DevicesDepends on configuration
Max Notification Appliance Circuits (NAC)Varies with configuration
Max Releasing CircuitsVaries with configuration
Max Remote AnnunciatorsVaries with configuration
Communication PortsMultiple
Operating Temperature32°F to 120°F (0°C to 49°C)
Humidity RangeUp to 93% RH, non-condensing
NAC Outputs4 (expandable)
NetworkingYes

Related product manuals