Warranty Policy
Slaughter Company, certifies that the instrument listed in this manual meets or exceeds
published manufacturing specifications. This instrument was calibrated using standards
that are traceable to the National Institute of Standards and Technology (NIST).
Your new instrument is warranted to be free from defects in workmanship and material
for a period of (1) year from date of shipment. You must return the “Owners Registration
Card” provided within (15) days from receipt of your instrument.
Slaughter Company recommends that your instrument be calibrated on a twelve-month
cycle. Instruments purchased and used in North America only, may have their warranty
extended in one year increments to a maximum of (3) years provided they are returned to
Slaughter Company at least annually for calibration and inspection. The annual
calibration and inspection must be performed annually every year following receipt of the
instrument. Any instrument not calibrated and inspected annually will not be eligible for
extended warranty status. This extended warranty is non-transferable and is offered only
to the original purchaser. A return material authorization (RMA) must be obtained from
Slaughter Company. Please contact our Customer Support Center at 1-800-504-0055 to
obtain an RMA number. Damages sustained as a result of improper packaging will not be
honored. Transportation costs for the return of the instrument for warranty service must
be prepaid by the customer. Slaughter Company will assume the return freight costs
when returning the instrument to the customer. The return method will be at the
discretion of Slaughter Company.
Except as provided herein, Slaughter Company makes no warranties to the purchaser of
this instrument and all other warranties, express or implied (including, without limitation,
merchantability or fitness for a particular purpose) are hereby excluded, disclaimed and
waived.
Any non-authorized modifications, tampering or physical damage will void your
warranty. Elimination of any connections in the earth grounding system or bypassing any
safety systems will void this warranty. This warranty does not cover batteries or
accessories not of Slaughter Company manufacture. Parts used must be parts that are
recommended by Slaughter Company as an acceptable specified part. Use of non-
authorized parts in the repair of this instrument will void the warranty.
To Next Page
Loading...
