EasyManua.ls Logo

SLE SLE5000 Model J - Exhalation Block Port Jet Sizes

SLE SLE5000 Model J
344 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 208 (Model J)
24.3.3 Pressure
Real Time Pressure: Resolution 1mbar, accuracy ±1mbar
Drift detection: detects drift when there is a pressure difference of more
than 5mbar between the two pressure transducers. Only
active when the measured pressure is below 70mbar.
Sampling Time: 2ms
Peak Pressure: 0 to 175 mbar (resolution 1mbar, accuracy ±0.75% of full
scale range)
PEEP Pressure: 0 to 175 mbar (resolution 1mbar, accuracy ±0.75% of full
scale range)
Mean Pressure: -175 to 175 mbar (resolution 1mbar, accuracy ±0.75% of
full scale range)
Delta P In HFO combined mode Delta P is measured during
expiration only.
24.4 Exhalation Block Port Jet Sizes
Reverse or negative jet: Ø 1.45/1.55 mm
Forward or positive jet: Ø 1.25/1.35 mm
Mean or 3rd jet: Ø 0.60/0.62 mm

Table of Contents

Related product manuals