SLE SLE5000 Model J - Re-Assembly and Testing; MOD Identification; Re-Assembly

Page 302 (Model J)
Step 37 Cable tie the capacitor loom to the
mains inlet loom as shown.
Step 38 Modification 4 (MOD4) complete.
34.11 Re-assembly and testing
34.12 MOD identification
Step 39 Locate the electronic unit serial number label. and cross
through number 1, 2 & 4.
34.13 Re-assembly
Step 40 Refit the control monitor board. (Reverse of the disassembly process).
Step 41 Refit the computer/display assembly. (Reverse of the disassembly process).
Step 42 Re-fit all covers.
Step 43 Complete a full functional test as per the appropriate service manual.
Step 44 Modifications complete.
Mains inlet loom
Cable tie