Page 240 (Model J)
33. Illustrated Parts List
How to use the illustrated parts list
Illustrations: The illustrations in this part list are representative of the actual components.
The parts list is divided into five columns, Items Nº, SLE Part Nº, Description, Effectivity
code and Units Per Assy.
Item Nº: refers to the numbered part in the appropriate figure. An item number preceded by
a dash (-20) is not illustrated. Gaps in the sequence of item numbering indicate that
numbers have been reserved for new components or a component variant.
SLE Part Nº: refers to the items SLE part number. This number should be quoted when
ordering spares. Where two items with part numbers that are same are followed by a
number in brackets; Example T7789 (1), T7789 (2) this denotes that this is an assembly that
when ordered as a spare only requires the one part number.
Assembly numbers L5007-0000
Assembly numbers that belong to the L5007-0000 series have been created to simplify the
breakdown of components in this illustrated parts list. In the description of the assembly
actual base components are referenced. Example (See items 85-125).
The assembly number breaks down into two components the first five characters L5007-
denotes the main assembly, the next four digits denotes the item number.
Description: A description of the relevant part.
Effectivity code: When the box is blank that part is common to all variants. When a letter
appears in the box then that part applies only to the top assembly marked with that code
letter.
Units Per Assembly: Quantity used for that assembly.
Example parts list.
- Item Not illustrated
Item Nº SLE Part Nº Description Effectivity
code
Units
Per
Assy.
4 1 E2559 Main Assembly 110v A RF
-1A E2559/01 Main Assembly 230v B RF
20 L5007-1009 .Top Assembly
(See items 50-85)
1
21 N2193 .Plate A
21A N2193/01 .Plate B
25 T7789 (1) ..Switch 1
30 T7789 (2) ..Switch, bezel 1
-35 T5553 ..Foot, Rubber 4
Attaching Parts
40 H2208 ..Screw 4
To Next Page
Loading...
