SLE SLE5000 Model J - Activation of Language Selection Program Form User Interface; Exit

(Model J) Page 29
The Select Language area
of the screen will display a
number of buttons. The
number of buttons will vary
according to the release of
foreign languages.*.
* Please contact SLE or your distributor for information on the availability of
secondary languages.
To install a secondary language select the language required.
The name of the selected
language will be displayed
in the selected language
area.
Press the “Install Language” button. When the name of the installed language is
displayed in the Installed Language area the installation is complete.
Press “Exit” and restart the ventilator.
5.6 Activation of Language Selection Program form User Interface
Enter the following code AABBCC into the ventilator
via the controller services panel to activate the
Language Selection Program.
Begin psv is the A button.
End psv is the B button.
Apnea sup is the C button.
5.7 Exit
The exit button will return the user to a DOS prompt. To return to the ventilator to
its normal operating mode, restart the ventilator.