Page 30 (Model J)
5.8 Touch Screen Calibration Program
The touch screen calibration program is accessed by the same method as for the
calibration program. See ’5.1 Accessing the Calibration Programs’ on page 24.
Enter you code here____________________
For the touch screen please follow the on screen instructions.
To return to the ventilator to its normal operating mode, restart the ventilator.
Warning: Failure to carry out the touch screen calibration correctly can
cause the ventilator to become unusable. A failed touch screen calibration
can only be corrected by connection of a specialist device. Please contact
SLE or your distributor in this situation.
To Next Page
Loading...
