SLE SLE5000 Model J - Checking the Modification Status

(Model J) Page 295
Step 11 Remove the 2 screws (B) and
4 screws (C) to release the
electronic inner cover.
34.6 Checking the modification status.
Inspect the label on the side of the
electronic unit.
If the label has Mod status 1, 2 & 3 or 1,
2 & 4 crossed through, the modifications
have already been installed.
If none of the mod status boxes are
crossed through proceed with the
modifications.
Note: design of inner cover may
vary.

C

C

B