110 • Settings
[ SNOM 360 USER MANUAL V1.00 ]
When you press the “start” button on this page, the tracing will
start and record every incoming or outgoing packet addressing your
phone. Press the “stop” button to stop the tracing. Click onto the “here”
link and save the fi le, which can be easily analyzed with ethereal.
Please be aware that the ring buffer used has a limited size,
which is fi lled up rapidly, especially when tracing audio streams, and will
overwrite the fi rst packets so that they disappear. Usually, they are the
interesting ones, so please try to record scenarios that are as short as
possible!
Memory
Look at the current memory usage of your phone.
Settings
Displays all settings of your phone including their current values.
This is a good starting point to create your own setting fi les, but not all
settings need to be specifi ed in your setting fi le, so please don’t save
the whole page to your setting fi le, but only the number of settings that
you really want to specify. Please see the white paper regarding “Mass
Deployment” on our website. Each individual setting is described there.
Read the part about the fl ags “! and &”, too!!!
This page is also important for us to consult in the event of a
support request, so please attach it to your request, as well.
6
To Next Page
Loading...
