Snom 360 - Divert When Busy; Divert When Not Answered; Call Completion; On Busy (CCBS)

snom technology AG • 55
[ SNOM 360 USER MANUAL V1.00 ]
4
To disable this feature, set “Redirection / Redirection” to
“Never”.
Divert when Busy
Activating the option “Redirection / Redirection / When Busy”,
diverts all incoming calls to the number set in “Redirection / Busy target”
when another call is already in progress.
Divert when not answered
You can set the number of seconds in “Redirection / Redirect time”
after which every incoming unanswered call is diverted to the number set
in “Redirection / Redirect target”.
Note: To activate call divert immediately, see “Diverting all calls”,
above.
Call completion
The call completion functionality allows the user to establish calls
successfully when the other party is busy or not answering. This feature
can be enabled via the menu item “Phone Behavior / Call Completion”.
On busy (CCBS)
When the party you are trying to reach is busy, the following
window will appear during a call attempt: