snom technology AG • 109
[ SNOM 360 USER MANUAL V1.00 ]
Ramdisk „-r“ is the ramdisk, which consists of the fundamental
fi les that have to be present to get the linux system running. And with
3.14, we have added a small application that is able to update all partitions
mentioned here via TFTP. This will only rarely change.
Application Filesystem (JFFS2) „-j“; here we have the application
performing as “the phone“. This is what will usually be updated.
Status
System Information
Here, you fi nd information regarding phone type, MAC Address,
IP Address, fi rmware version (version code - this is extremely
important!), boot loader, and fi rmware URLs.
Log
Depending on a selectable log level, the log messages are shown
here. Don’t forget to attach this log to your support request!
SIP Trace
A quite helpful feature to display SIP signaling. For a support
request, clear this page, perform your not-working scenario, reload the
page, and attach it to your support request.
DNS Cache
An option to look into the current DNS cache. It is highly
recommended to add this page to a potential support request!
PCAP Trace
Create packet traces from current network traffi c right on your
phone! This is a really powerful tool to fi nd out what is going on in the
network around your phone.
6
To Next Page
Loading...
